![]() ![]() : Added note about testing display before applying foam tape. Added note about compatibility with software-based sleep mode. : Added note about backlight bleeding protector. Ensure the shell is properly trimmed for the display before attempting to install it. Too much pressure can permanently damage the display, do not force the shell closed around the LCD.The ribbon is very fragile, be sure to handle it carefully to avoid damage.Individual replacement parts may be available in the "Included" section above. We are unable to accept returns or replacements on kits that have been installed in a console. We strongly recommend testing the display before installing it in your Game Boy Advance. Please follow our Display Testing Guideto confirm the kit is working before the adhesive is secured, the display protection sheet removed, or any non-critical soldering to the ribbon or driver PCB.It's subtle and we consider the benefits of the display to outweigh this minimal tearing, but please keep this in mind before you purchase V1 of this product. V1 of the ribbon cable presents a visible diagonal frame refresh that occurs in moments of transition, which is noticeable in some games.Backlight bleeding protectors are neither necessary or usable with the IPS LCD.11-hours of battery life on brightness level 6 with volume, tested using our 1700mAh rechargeable battery pack.We recommend using 30 AWG silicone stranded-core wire. ![]() Wires to connect the brightness controller are not included with the LCD.Since the viewing area is approximately the same dimensions as the shell's display cut-out (~77 mm) the the edge of the shell will be visible unless trimmed.The interior left wall (D-pad side) must be removed to center the viewing area on the display. ![]() We sell silk screen centered lenses with this larger viewing opening. In order to make the entire display visible, the LCD requires a lens with a slightly larger viewing area (~1 mm on each side).
0 Comments
Leave a Reply. |